The quality of powder layers, specifically their packing density and surface uniformity, is a critical factor influencing the quality of components produced by powder bed metal additive manufacturing (AM) processes, including selective laser melting, electron beam melting and binder jetting. The present work employs a computational model to study the critical influence of powder cohesiveness on the powder recoating process in AM. The model is based on the discrete element method (DEM) with particle-to-particle and particle-to-wall interactions involving frictional contact, rolling resistance and cohesive forces. Quantitative metrics, namely the spatial mean values and standard deviations of the packing fraction and surface profile field, are defined in order to evaluate powder layer quality. Based on these metrics, the size-dependent behavior of exemplary plasma-atomized Ti-6Al-4V powders during the recoating process is studied. It is found that decreased particle size / increased cohesiveness leads to considerably decreased powder layer quality in terms of low, strongly varying packing fractions and highly non-uniform surface profiles. For relatively fine-grained powders (mean particle diameter $17 \mu m$), it is shown that cohesive forces dominate gravity forces by two orders of magnitude leading to low quality powder layers not suitable for subsequent laser melting without additional layer / surface finishing steps. Besides particle-to-particle adhesion, this contribution quantifies the influence of mechanical bulk powder material parameters, nominal layer thickness, blade velocity as well as particle-to-wall adhesion. Finally, the implications of the resulting powder layer characteristics on the subsequent melting process are discussed and practical recommendations are given for the choice of powder recoating process parameters.     «

The quality of powder layers, specifically their packing density and surface uniformity, is a critical factor influencing the quality of components produced by powder bed metal additive manufacturing (AM) processes, including selective laser melting, electron beam melting and binder jetting. The present work employs a computational model to study the critical influence of powder cohesiveness on the powder recoating process in AM. The model is based on the discrete element method (DEM) with parti...     »