The German radar satellite TerraSAR-X was launched in June 2007. Since then, it is continuously providing high resolution space-borne radar data which are perfectly suitable for sophisticated interferometric applications. I.e. the mission concept and the SAR sensor support the coherent stacking of radar scenes which is the basis for advanced processing techniques e.g. Persistent Scatterer Interferometry (PSI) and SAR tomography. In particular, the short repeat cycle of eleven days and the highly reproducible scene repetition of the spotlight acquisitions support the stacking and consequently the time series analysis of the radar data. Furthermore, the sensor's orbital tube is precisely controlled to be in the order of 200 m which basically allows to utilize the baseline spread of the stacked acquisitions. However, this small spread is actually limiting the resolution in the SAR tomography. Interferometric applications could be demonstrated already in a very early stage of the TerraSAR-X mission. Because the resolution is 0.6 m in slant range and 1.1 m in azimuth in the high resolution spotlight mode the PSI and the SAR tomography processing results were impressive. Urban areas and single buildings could be mapped from space in three dimensions. Even the structural stress of single buildings caused by thermal dilation could be demonstrated. However, extended layover areas are caused by typical buildings and as a consequence complicated scattering situations need to be resolved. DLR's operational In-SAR processing system GENESIS had already been adapted to cope with the new sensor modes of TerraSAR-X and their new specific spectral characteristics. Now, the new image characteristics e.g. the extended layover areas and the long time coherent distributed scatterer need better to be supported. Subject is to optimally exploit the available information e.g. the radar reflectivity. Several algorithms of the processing system can take advantage of this, e.g. the scatterer - configuration detection. As a matter of fact, the scatterer configuration has now become a very important characteristic for each resolution cell. It influences e.g. the estimation data extraction, the estimation of the 3D location and basically the estimation precision. A typical resolution cell can be composed of a single dominant point scatterer surrounded by clutter, two or more dominant point scatterers in clutter and of distributed scatterers with a specific phase stability over time. The paper provides technical details and a processing example of a newly developed algorithm to retrieve the 3D location of point scatterers from the scene's intensity which finally also provides the information on the scatterer configuration in a resolution cell.     «

The German radar satellite TerraSAR-X was launched in June 2007. Since then, it is continuously providing high resolution space-borne radar data which are perfectly suitable for sophisticated interferometric applications. I.e. the mission concept and the SAR sensor support the coherent stacking of radar scenes which is the basis for advanced processing techniques e.g. Persistent Scatterer Interferometry (PSI) and SAR tomography. In particular, the short repeat cycle of eleven days and the highly...     »

3D location, 3D reconstruction, AD 2007, Buildings, Clutter, coherent distributed scatterer, complex scattering situations, estimation data extraction, GENESIS, geophysical techniques, German radar satellite, interferometric applications, Layout, persistent scatterer interferometry, point scatterers, Radar applications, radar interferometry, radar reflectivity, Radar scattering, SAR radargrammetry, SAR tomography, Satellites, scatterer configuration detection, space-borne radar data, spaceborne radar, spotlight acquisitions, Stacking, Synthetic aperture radar, TerraSAR-X, thermal dilation, Thermal stresses, time series analysis, tomography     «

3D location, 3D reconstruction, AD 2007, Buildings, Clutter, coherent distributed scatterer, complex scattering situations, estimation data extraction, GENESIS, geophysical techniques, German radar satellite, interferometric applications, Layout, persistent scatterer interferometry, point scatterers, Radar applications, radar interferometry, radar reflectivity, Radar scattering, SAR radargrammetry, SAR tomography, Satellites, scatterer configuration detection, space-borne radar data, spaceborne...     »