Gas-solid fluidized beds play an important role in many industrial operations. However, there still is a lack of
knowledge concerning the processes inside the bed, which impedes proper designing and upscaling of fluidized
bed reactors. In this work, biomass steam gasification in a fluidized bed reactor is investigated with a coarsegrained
CFD-DEM approach.
The numerical model in the Eulerian-Lagrangian framework treats the gas phase as a continuum and describes
the particle interactions with the discrete element method (DEM). The non-spherical shape of the particles
is accounted for in the momentum exchange calculation with the gas phase. The considered systems consist
of steam as the fluidization gas, entering the bottom region of the three dimensional reactor geometry through
inclined nozzles in an inner duct at the center axis. The wood pellets are fed into the reactor from the top of the
freeboard together with a nitrogen purge gas stream. Over time, different operation modes occur, since there is
no solids removal from the gasifier and unconverted material is continuously added to the bed.
Three different operation modes are investigated. For the start-up procedure, the reactor is filled with
2.565 kg of sand particles. The inert material is allowed to settle for three seconds and is fluidized for another
three seconds until quasi steady-state is achieved. Afterwards, the wood pellets are added for 35 s at a rate of one
pellet every two seconds and undergo the processes of heating, drying, pyrolysis and char conversion. From the
simulation results and literature correlations, the average time intervals for pyrolysis and char conversion, as
well as the respective particle properties (temperature, diameter, density) are estimated. With the knowledge of
the average composition of reactive material in the reactor, variable operating points can be simulated.
The other two cases investigated are after approximately 20 and 50 h of operating time. Additionally to the
start-up procedure, 0.6 and 1.5 kg of inert residue are added to the sand particles. Again, the inert material is
allowed to settle for three seconds and is fluidized for another three seconds. Subsequently, the average reactive
«
Gas-solid fluidized beds play an important role in many industrial operations. However, there still is a lack of
knowledge concerning the processes inside the bed, which impedes proper designing and upscaling of fluidized
bed reactors. In this work, biomass steam gasification in a fluidized bed reactor is investigated with a coarsegrained
CFD-DEM approach.
The numerical model in the Eulerian-Lagrangian framework treats the gas phase as a continuum and describes
the particle interactions wit...
»
Login
BibTeX