Voltage source back-to-back power converters are widely used in grid-tied applications. This paper presents a quasi-centralized direct model predictive control (QC-DMPC) scheme for back-to-back converter control without a dc-link outer-loop controller. Furthermore, the QC-DMPC is experimentally compared with a conventional proportional-integration (PI) dc-link controller-based DMPC (PI-DMPC) scheme. For the QC-DMPC scheme, the dc-link voltage is directly controlled by a grid-side predictive controller using a dynamic reference generation concept and load-side power estimation. For the PI-DMPC scheme, the dc-link voltage is controlled by an external PI controller. Both schemes are implemented on a field programmable gate array (FPGA)-based platform. Effectiveness of the proposed QC-DMPC is verified by both simulation and experimental data. Moreover, FPGA implementation issues (resource usage and timing information), dc-link control performance, and robustness to parameter variation of the two DMPC schemes are compared in detail. The results emphasize that the QC-DMPC may outperform the PI-DMPC scheme in normal operation but with a slightly higher usage of FPGA resources. However, PI-DMPC scheme is more robust when parameter variations are considered.     «

Voltage source back-to-back power converters are widely used in grid-tied applications. This paper presents a quasi-centralized direct model predictive control (QC-DMPC) scheme for back-to-back converter control without a dc-link outer-loop controller. Furthermore, the QC-DMPC is experimentally compared with a conventional proportional-integration (PI) dc-link controller-based DMPC (PI-DMPC) scheme. For the QC-DMPC scheme, the dc-link voltage is directly controlled by a grid-side predictive cont...     »